Ok, I'm out of my mind stressed about this right now. Here goes the story:
Bought a new graphics card (gtx550ti) to install into my fairly old gaming rig. ( core2quad something with 4gb ram, 1 hdd , 1 ssd and 2 dvd drives running from a 400W psu)
I was having some problems, I figured they were coming from the old drivers not being deleted properly due to a slightly over eager install. Unplugged the card, booted from onboard graphics, deleted all the old drivers and installed the new ones from Nvidia's website. Then the real problems began.
If my motherboard video options are set to auto or pci-e, I had no picture showing up. Unplug the card and it will run on the onboard graphics fine. After some more of this song and dance, during resetting the cmos I bumped the card. All of a sudden it won't detect it. Reseated the card and tried again, detects the card this time but still can't get picture coming through it. Went to do the whole driver song and dance again except this time I rebooted after each item was removed.
Then things took a turn for the worse. After the bios screen, right where my windows loading screen should be I get a black screen with blinking cursor and nothing else. Nothing responds, Nothing beeps, just nothing.
Tl;DR
installed new graphics card, Worked for about 5 minutes, Driver hell, Could only get video from onboard graphics. Pc now stops after bios screen and does absolutely nothing.
I'm kinda lost as to where to go from here now. Ideas before I go on a rampage?
Bought a new graphics card (gtx550ti) to install into my fairly old gaming rig. ( core2quad something with 4gb ram, 1 hdd , 1 ssd and 2 dvd drives running from a 400W psu)
I was having some problems, I figured they were coming from the old drivers not being deleted properly due to a slightly over eager install. Unplugged the card, booted from onboard graphics, deleted all the old drivers and installed the new ones from Nvidia's website. Then the real problems began.
If my motherboard video options are set to auto or pci-e, I had no picture showing up. Unplug the card and it will run on the onboard graphics fine. After some more of this song and dance, during resetting the cmos I bumped the card. All of a sudden it won't detect it. Reseated the card and tried again, detects the card this time but still can't get picture coming through it. Went to do the whole driver song and dance again except this time I rebooted after each item was removed.
Then things took a turn for the worse. After the bios screen, right where my windows loading screen should be I get a black screen with blinking cursor and nothing else. Nothing responds, Nothing beeps, just nothing.
Tl;DR
installed new graphics card, Worked for about 5 minutes, Driver hell, Could only get video from onboard graphics. Pc now stops after bios screen and does absolutely nothing.
I'm kinda lost as to where to go from here now. Ideas before I go on a rampage?